Kobe RA02 SQB-5 Range Hood

INSTALLATION INSTRUCTIONS AND OPERATION MANUAL - Page 20

For RA02 SQB-5. Series: Deluxe Series, RA02 Series
Also, The document are for others Kobe models: RA0230SQB-DC-5, RA0230SQB-DC24-5, RA0230SQB-DC48-5, RA0236SQB-DC-5, RA0236SQB-DC24-5, RA0236SQB-DC48-5, RA0242SQB-DC-5, RA0242SQB-DC24-5, RA0242SQB-DC48-5, RA0248SQB-DC-5, RA0248SQB-DC24-5, RA0248SQB-DC48-5

PDF File Manual, 24 pages, Read Online | Download pdf file

RA02 SQB-5 photo
Loading ...
Loading ...
Loading ...
17
TROUBLE SHOOTING
Issue
Possible Cause
Solution
After
Installation,
both motors
and lights are
not working.
The power is not on. Make sure the circuit breaker and the
unit’s power is ON. Use a voltage meter
to check the power supply.
The wire connection is not secure.
Check and tighten wire connection.
The control panel is defective. Replace the control panel.
Lights are
working, but
motor(s) is
not.
The motor(s) is defective. Replace the motor.
The capacitor(s) is defective. Replace capacitor(s).
The control panel is defective. Replace the control panel.
The range
hood is
vibrating.
The blower system is not secure.
Tighten the turbine impeller/squirrel cage
and air chamber.
The squirrel cage is not balanced. Replace the squirrel cage.
Hood is not secured in place. Check the installation of hood, tighten the
mounting bracket.
The motor is
working, but
the lights are
not working.
LED Light(s) is defective.
Replace the LED light.
The light wiring(s) is loose.
Check wire continuity from light
transformer to LED light housing(s).
Light transformer is defective.
Check power input and power output on
the light transformer. If it’s needed,
replace the light transformer.
The control panel is defective. Replace the control panel.
The range
hood is not
venting out
correctly.
The range hood is installed
outside of the manufacture
recommended clearance.
Adjust the clearance between the range
hoods and cook top to 27” to 30”. For
Island range hood, the clearance between
the range hoods and cook top is 30” to
36”.
There is no make-up air inside the
house.
Open the window to enhance the
performance of the range hood by
creating a sufficient make-up air.
Obstacle blocking the pipe work.
Remove all obstacles from the duct work.
The pipe size is smaller than the
suggested pipe size.
Change the ducting according to the
manufacture suggestion.
Cold air is
coming into
the home.
The pipe connection is not
properly sealed.
Check the pipe installation.
The damper is not properly
installed or is missing from the
installation.
Check the damper installation.
The damper is not installed. By installing the damper, it will help to
eliminate air backflow.
Loading ...
Loading ...
Loading ...