Loading ...
Loading ...
Loading ...
● It may tak
e a longer time than usual to process data when ECM is enabled because the error checks
and corrections are performed while the data is transmitted.
<Menu> <Fax Settings> <TX Function Settings> <ECM TX> Select <Off> or <On>
<Set Pause Time>
For example, when you make calls by dialing "0 - (pause) - (telephone number)", 0 is dialed rst and then a fe
w
seconds later, the telephone number. When sending faxes overseas, you need to specify destinations by dialing
"(international access code) - (country code) - (area code) - (fax number)" but consecutive numbers that are
input without pauses may not be recognized correctly. In this case, try adding a pause after the international
access code or the fax number. If the code or the number is still not recognized correctly, change the duration
of the pause. For instructions on how to enter a pause, see step 4 on
Basic Operations for Sending
Fax
es(P. 195) .
1 to 2
to 15 (sec.)
<Menu> <Fax Settings> <TX Function Settings> <Set Pause Time> Specify the duration of
pause <Apply>
<Auto Redial>
Specify settings for Auto Redial, a function that automatically redials the fax number after several minutes if the
rst attempt fails because the line is busy
. You can specify how many times the machine redials and the interval
between redials.
<Off>
<On>
<Number of Times to Redial>
1 to 2 to 10 (times)
<Redial Interval>
2 to 99 (min.)
<Redial When Err
or Occurs>
<Off>
<On>
<Menu> <Fax Settings> <TX Function Settings> <Auto Redial> <On> Specify the settings
<Apply>
Setting Menu List
392
Loading ...
Loading ...
Loading ...