Loading ...
Loading ...
Loading ...
CUSTOMER RESPONSIBILITIES
,.
AS YOU COMPLETE
.EOO...SE.V,CE >'S V,OEO.TES
Check Brake Operation V' V'
Check Tire Pressure V' V p
Check Operator Presence and
T Interlock Systems V _
a Check for Loose Fasteners V' 1##5 I_
A
Sharpen/Replace Mower Blades I##_
C Lubrication Chart V'
0 Check Battery Level
R Clean Battery and Terminals I_ V'
Check Transaxle Cooling I_
Check V-Belts I_
Check Engine Oil Level V' V'
Change Engine Oil (with oil filter) VI1,2 V I
E Change Engine Oil (without oil filter) 1_1_1,2 V p
N Clean Air Filter 11_2
G Clean Air Screen VJ2
NI Inspect Muffler/Spark Arrester V'
E Replace Oil Filter (If equipped) _1,2
Clean Engine Cooling Fins V' 2
Replace Spark Plug V' I_
Replace Air Filter Paper Cartridge V'2
Replace Fuel Filter I_
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt to 35 ft.-Ibs, maximum.
Do not overtighten.
GENERAL RECOMMENDATIONS
LUBRICATION CHART
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
• Once a year you should replace the spark plug, clean or
replace airfilter, and check blades and belts for wear. A
new spark plug and clean air filter assure proper air-fuel
mixture and help your engine run better and last longer.
BEFORE EACH USE
• Check engine oillevel.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlocksystems for proper operation.
• Check for loosefasteners.
15
(_SPINDLE -I/'_-_-----_ I_ (_SPINDLE
ZERK ZERK
BEARING ZERK_ --_ BEARING ZERK
__ @ENGINE
,'f r'
' , I .trT-lU{! '
, , I__-_.___-_-__L._! ,
', , \ / ',_', ®GEARSH,FT
I I- ,._ ..... -J-r-J i PIVOTS
_SAE 30 OR 10W30 MOTOR OIL
(_GENERAL PURPOSE GREASE
(_REFER TO CUSTOMER RESPONSIBILITIES "ENGINE"
SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT
POINTS WHICH HAVE SPECIAL NYLON BEARINGS.
VISCOUS LUBRICANTS WILL ATTRACT DUST AND DIRT
THAT WILL SHORTEN THE LIFE OF THE SELF-
LUBRICATING BEARINGS. IF YOU FEELTHEY MUST BE
LUBRICATED, USE ONLY A DRY, POWDERED
GRAPHITE TYPE LUBRICANT SPARINGLY.
Loading ...
Loading ...
Loading ...