Loading ...
Loading ...
Loading ...
www.eureka.com
9
1. To remove the brushroll cover grasp
the release button and pull up and
forward.
2. Remove brushroll by pulling up on
the tab located on the left side.
3. Rinse brushroll and brushroll cover.
Use brushroll cleaning tool to help
remove debris and her on the roller.
4. Wipe the brushroll chamber
thoroughly to remove any debris.
5. Put the brush roll upright in the
drying stand let your brush roll and
cover dry thoroughly for 24 hours
before reassembling.
The brushroll, brushroll cover,
dirty water tank, clean water tank, lids
Please follow cleaning instructions in
this manual.
6. Install brushroll by inserting the right
end of the roller into the right side
aligning the tab on the left side with
the slot and pressing into place.
7. To reinstall the brushroll cover, tilt
the window back and align both tabs
on the lower edges of the cover with
push in and downwards until it clicks
into place.
Store the machine on its base in a dry,
protected area. Ensure machine is not
exposed to freezing temperatures or
internal components could be damaged
and warranty will be void.
1
Never operate vacuum cleaner without
cover in place.
!
2
3 4
!
CAUTION
Loading ...
Loading ...
Loading ...