Loading ...
Loading ...
Loading ...
10
Eureka Customer Service HELPLINE 1-800-282-2886
!
This vacuum cleaner has a special thermostat that protects the vacuum in case of motor
overheating.
proceed as follows: 1) Push the power switch to off and
unplug the vacuum. 2) Check the vacuum for a possible source of overheating such as a full
them and wait at least 30 minutes before attempting to use the vacuum. 3) After the 30 minute
period, plug the vacuum back in and turn on the switch. If the vacuum still does not work, call
the Eureka Customer Service HELPLINE at 1-800-282-2886.
The brushroll is entangled with debris,
brushroll is not properly installed or
vacuum is locked in the upright position.
Check brushroll chamber for debris
Recline machine to make sure
brushroll is activated
The dirty water tank has reached its
capacity
Empty dirty water tank
Brushroll, brushroll cover and/or dirty
water tank are not properly installed
Turn machine off and reinstall making
in place
The roller brush is entangled with debris
No power Recharge
Check brushroll chamber for debris
The suction nozzle or pipe is blocked Clean the debris in the suction nozzle
or pipe
is dirty
Empty dirty water tank and clean
Filter is clogged
and dry thoroughly before reinstalling
The suction nozzle is blocked Remove clogs/debris from pipe
and/or brushroll chamber
The dirty water tank has reached its
capacity
Empty dirty water tank
Clean water tank is empty
The clean water tank is not properly
installed
Turn machine off and reinstall making
in place
properly installed
Turn machine off and reinstall making
in place
completely dry 24 hours
Loading ...
Loading ...
Loading ...