Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/84419841-gpw1600/bg12.png)
EN - 18
OPERATION
USING THE SPRAY WAND TRIGGER
For greater control and safety, keep both hands on the pressure washer gun at all times.
■ Pull back and hold the trigger to operate the
pressure washer.
■ Release the trigger to stop the ow of water
through the spray wand.
TO ENGAGE THE LOCK-OUT
(See Figure 9-1.)
■ Push up on the lock-out until it clicks into the slot. This will prevent any unintentional starts of the
pressure washer.
TO DISENGAGE THE LOCK-OUT
(See Figure 9-2.)
■ Push the lock-out down and into its original position. For the most effective cleaning, the spray tip
should be between 8 in. and 24 in. from the surface to be cleaned. If the spray is too close it can
damage the cleaning surface.
Fig. 9-2
Fig. 9-1
Locked
Unlocked
W A R N I N G
Do not slide lock-out button when you have the trigger at back position.
Loading ...
Loading ...
Loading ...