Loading ...
Loading ...
Loading ...
Attention: Please fully insert the plug of the top cover and main power cord into
the socket on the machine in order to avoid overheating and damage of the
socket due to poor contact.
Attention: please open the lid in the appropriate manners, use one hand to hold the
lid and the other to lift the lid up.
4. Connect the main power wire with machine body and plug in the electric outlet. Press “Reset
Button”, the fan and distilling process begin.
[ 6 ]
5. Water will begin to drip into the storage bottle after approximately 30 minutes. It will take
approximately 4 hours to distill 4 Liters of water (depend on local environment and
temperature) . The unit will automatically shut down when the process finished.
PS: The unit must be allowed to cool down under 158°F before starting another
distilling cycle. This will prevent injuries from scalding water and prolong the life of
the distiller.
6. If continuous process, after water bottle fully filled with distilled water, but reset button still in
power, disconnect the power wire of the top cover and main power wire to prevent injuries from
scalding water.
7. Please take off the top cover after 10 minutes and refill in with water, put the top cover back
stably and connect the power wire of the top cover and main power wire, the distiller restarts to
warm up and re-process. The distiller is reliable and safe under 24hrs process.
8. Do not use the first few (3-5) bottles of distilled water. It will take one distilling cycle for
the unit to self clean. Wipe out tank and rinse / discard water in storage bottle.
Loading ...