Ancona AN-22108WHT 2-piece 36” Gas Range with Convection Oven and 600 CFM Wall Mount Pyramid Range Hood Kitchen Pair

Product Manual: - Page 49

For AN-22108WHT.

PDF File Manual, 68 pages, Read Online | Download pdf file

AN-22108WHT photo
Loading ...
Loading ...
Loading ...
— 16 —
STEP 1
Read the Safety Precautions
Please read the safety precautions on pages 4 to 10. Safety instructions pertaining to each step have been outlined in the
installation steps; however it is important to read ALL the safety instructions.
IMPORTANT: It is the installer’s responsibility to comply with installation clearances.
STEP 2
Plan Desired Location, Unpack the Appliance and Prepare Tools
Plan a desirable location that ts all requirements in the Safety and Install sections of this manual. Unpack the appliance
and parts carefully (all burners, burner caps and cooking grates). Make sure all parts are included as shown on page 11 and
set aside. Assemble all tools as shown on page 12. DO NOT remove the protective lm covering the appliance.
Installation
STEP 3A (range tops only)
Prepare Cut-Out
Cut the opening in the countertop. To ensure accuracy it
is best to make a template (see Figure 5) for the opening.
Make sure the sides are parallel also rear and front cuts are
exactly perpendicular to the sides. Observe all minimum
clearances.
•AN-2160 / 30-inch models (Length × Depth × Height):
30.5” × 26” × 7.5” (77.5 cm × 66 cm × 19.1 cm)
•AN-2161 / 36-inch models (Length × Depth × Height):
36.5” × 26” × 7.5” (92.7 cm × 66 cm × 19.1 cm)
•AN-2162 / 48-inch models (Length × Depth × Height):
48.5” × 26” × 7.5” (123.2 cm × 66 cm × 19.1 cm)
Height
Depth
Length
Figure 5
WARNINGS (ranges only):
•ExtremelyHeavy.
•Properequipmentandadequatemanpowerwhenmovetherangetoavoidpersonalinjuryordamagetotheunitor
the floor. The unit is heavy and rests on adjustable steel legs.
•Failuretofollowthisadvicemayresultindamageorpersonalinjury.
WARNING (ranges only):
DO NOT LIFT THE UNIT BY THE OVEN DOOR HANDLE.
Loading ...
Loading ...
Loading ...