Loading ...
Loading ...
Loading ...
Recording
IMPORTANT:
• It should be noted that it may be unlawthl to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable program and in any
literary, dramatic, musical, or artistic embodied
therein.
• The recording level is automatically set con'ectly, so it is
not affected by the VOLUME, the SUBWOOFER LEVEL,
and the SOUND MODE controls, or the SOUND TURBO
button. Thus, during recording you can adjust the sound
you are actually listening to without affecting the _cording
level.
• If there are excessive noise or static in the recording you
have made, the unit may he too close to a TV. Increase the
distance between lhe TV and the unit.
• You can only use type I tape for _cording.
Toprotectyourrecording
Cassettes have two small tabs
on the back to protect from
_mexpecled erasaz_ or re x
recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
Tokeepthe bestrecordingandplaybacksound
quality
If the heads, capstans, and pinch rollers of the cassette deck
become dirty, the following will occur:
• Impaired sound quality
• Discontinuous sound
• Fading
• Incomplete erasure
• Difficulty in recording
_I1[11
To clean the heads, capstans, and pinch rollers
Use a cotton swab moistened with alcohol.
Pinch rollers
Capstans /
Heads
To demagnetize the heads
Turn off the unit, and use a head demagnetizer (available at
electronics and audio shops).
21
Recordingona Tape
1 Press __ EJEC'r and insert a recordable cassette
with the exposed part of the tape down.
\\
\,
\
2
3
4
5
Close the cassette holder gently.
• If you want to record on both sides of atape, see "To
record on both sides_Reverse Mode."
Check the tape direction of the cassette deck.
• Ifthe tapedirection is notcorrect, press TAPE _ I_ twice
then • to change the tape direction.
Start playing the source--FM, AM, CD player,
or auxiliary equipment connected to AUX jacks.
• When the source is the CD playe_, you can also use
Synchronized Recording--(see page 22).
Start recording.
On the unit:
Press REC START/STOP.
START/STOP
On the remote control:
Press and hold REC START/
STOP for more than 1 second.
The REC (recording) lamp flashes when l_cording starts, and
the tape direction indicator (m-or 4) starts flashing slowly.
• If no cassette is inserted, "NO TAPE" appears on the
display. If a protected tape is inserted, "NO REC"
appe_s on the display.
To stop recording immediately, pl_ss REC START/STOP or
• (or pl_ss and hold REC START/STOP on the remole control
for more than 1 second).
To remove the cassette, press _ EJECT to open the cassette
holdel:
Torecordonbothsides--Reverse Mode
On the unit ONLY:
Press €_--_ REVERSE MODE so that the
Reverse Mode indicator lights up on the
display like--C7_).
R£VERSE MODE
• When using the Reverse Mode for recording, start
_cording in the fo_ard (1_) direction first. Otherwise,
_cording will stop when only one side (reverse) of the tape
is recorded.
To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up on the display like--Z.
Loading ...
Loading ...
Loading ...