Loading ...
Loading ...
Loading ...
PlaynngBackTapes
You can play back type I tapes.
PlayingBacka Tape
1 Press _ EJECT for the cassette deck.
I
Toplaybothsidesrepeatedly--ReverseMode
When using Reverse Mode, the tape automatically reverses at
the end of one side, starts playing the other side of the tape,
and repeats the same process.
On the unit ONLY:
To use Reverse Mode, press (_--'_ REVERSE
MODE so that the Reverse Mode indicator
lights up on the display like--CT').
REVERSE MODE
To cancel Reverse Mode, press the button again so that the
Reverse Mode indicator lights up on the display like--.-".
\
2 Insert a cassette with the exposed part of the
tape down.
3 Close the cassette holder gently.
4 Press "rAPE -_ _. _ .... 1_
The tape play starts and the tape
direction indicator (1_ or 4) starts flashing slowly to
indicate the tape's running diz_ction.
• Each time you press the button, the tapedirection changes
and "REVERSE" appears for a while on the display.
I_ :plays the front side.
_1 :plays the reverse side.
• If no cassette is inserted, "NO TAPE" appears on the
display.
When the tape plays to the end, the deck automatically
stops if the Reverse Mode is off. (See "To play both sides
repeatedly_Reverse Mode.")
To stop playing, press II.
To last-wind to the left or to the right, pl_ss _ or _1_ (or
(IDq_) / _ (_1_) on the remote control) while the tape
is not running.
The tape dil_ction indicator (1_ or 4) starts flashing quickly
on the display.
To remove the cassette, press A EJECT to open the cassette
holder.
LocatingtheBeginningofa Song--MusicScan
You can use Music Scan to locate the beginning of a song.
Music Scan searches for blank portions that usually separate
recorded songs, then plays the next song.
Tofindthe beginningofthe currentsong
During play, press _ or
(or _ (I,_-) / _ (-ql_) on the remote
control) in the opposite direction to the tape
play.
The tape direction indicator of the
opposite direction to the tape play starts flashing intermittently.
Searching stops automatically at the beginning of the current
song, and it stm'ts automatically.
Tofindthe beginningofthe nextsong
During play, press _ or
(or _ (I,_-) / _ (-ql_) on the remote
control) in the same direction as the tape is
playing.
The tape direction indicator of the same
di_vction as the tape is playing starts flashing intermittently.
Searching stops automatically at the beginning of the next
song, and the song starts automatically.
_ usic Scan works by detecting a 4-second long blank
between each song, so it will not work well in the
following cases
• No blank at 1he beginning of a song.
• Noise (often caused by much use or poor quality dubbing) which
fills the blank,
• Long, very soft passages or pauses in a song.
I
The use of C-120 or thinner tape is not I
1_ recommended, since characteristic deterioration
I
may occur and this tape easily jams in the pinch-
rollers and the capstans.
2O
Loading ...
Loading ...
Loading ...