Loading ...
Loading ...
3 | P a g e
Connecting To Your Phone
Your adapter is designed to accept
phones with every size, shape and
button/camera location either in a
protective case or without.
The phone is held securely to the
adapter by a SPRING mechanism
between two opposing GRIPPERS.
One of the GRIPPERS is stationary
and the other moves allowing the
phone to be quickly installed or
removed. The GRIPPER HOUSING
itself is able to be adjusted both up
and down and side to side. This dual
axis adjustment enables the phone
camera to be precisely aligned in the
APERTURE.
Two knurled
ALIGNMENT KNOBS
can be loosened to
move the phone
relative to the
APERTURE and then
tightened so that
subsequent
insertions and
removals result in
consistent camera
placement.
At the top of the
adapter there is an
END STOP that can
be rotated such that
it touches the top of the phone and used as a stop to remember the position. Finally a THUMBWHEEL is
set inside each GRIPPER which allows for independent height adjustment of the GRIPPERS. This
adjustment is seldom used but is available to ensure proper camera alignment only for phones that do
not have flat back surfaces.
Figure 7 Camera properly centered in APERTURE
Figure 6 Phone fully positioned by GRIPPERS & END STOP
Loading ...
Loading ...
Loading ...