Loading ...
Loading ...
Loading ...
en-CA
38
Adjusting the floorhead
(Figs.16+17)
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the floorheads illustrated.
This vacuum cleaner can be used for
daily cleaning of carpets, rugs, and
robust hard floors.
Miele offers a range of other floorheads,
brushes, and accessories for other
types of flooring and special
applications (see “Optional
accessories”).
Please observe the flooring
manufacturer’s cleaning and care
instructions.
Clean even hard floors which are not
susceptible to scratching, as well as
flooring with gaps or deep crevices in it,
with the brush protruding:
Press the footswitch.
Vacuum carpets and rugs with the
brush retracted:
Press the footswitch.
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier to
manoeuvre (see “Use” – “Regulating
the suction power”).
Adjustable floorhead (Fig. 18)
The adjustable floorhead can also be
used for vacuuming the stairs.
Risk of injury caused by falling
vacuum cleaner.
You may be injured if the vacuum
cleaner should fall from the stairs.
When vacuuming stairs, it is best to
start at the bottom of the stairs and
move up.
Unwinding the power cable (Fig. 19)
Pull the power cable out to the
required length.
Insert the plug into the electrical
socket.
Risk of damage due to
overheating.
The power cable may overheat after
a long period of use.
If vacuuming for longer than
30minutes, the power cable must be
pulled out all the way.
Rewinding the power cable (Fig. 20)
Remove the plug from the electrical
socket.
Press the cable rewind footswitch.
The power cable will rewind
automatically.
Switching on and off(Fig. 21)
Press the On/Off footswitch.
During vacuuming
During vacuuming, pull the vacuum
cleaner behind you like a sledge.
Loading ...
Loading ...
Loading ...