Loading ...
Loading ...
Loading ...
• The edge of the square and the saw blade should be
parallel as shown in figure 17.
• If the front or back edge of the saw blade angles away
from the square as shown in figures 18 and 19, adjust-
ments are needed.
• Loosen the socket head screws that secure the miter
fence to the miter table. See Figure 16.
• Rotate the miter fence left or right until the saw blade is
parallel with the square.
• Retighten the screws securely and recheck the blade-
to4ence alignment.
Your saw has two scale indicators, one on the bevel scale
and one on the miter scale. After squaring adjustments have
been made, it may be necessary to loosen the indicators
screws and reset them to zero. See Figure 20.
O o •
\ SQUARE MITER
MITER LOCKHANDLE
TABLE
VIEWOFBLADE
SQUAREWITHFENCE
Fig. 17,j
ALTER
FENCE
MITER FRAMING
TABLE SQUARE
VIEWOFBLADENOTSQUAREWITH
FENCE,ADJUSTMENTSAREREQUIRED
Fig. 18
o
E
SQUARE
VIEWOF BLADENOTSQUAREWITH
FENCE,ADJUSTMENTSAREREQUIRED
Fig. 19
INDICATOR
SCREW
MITER
SCALE
SCALE
INDICATOR
INDICATOR
POINT
INDICATOR
SCREW,_
BEVEL / i
SCALE_
SCALE
INDICATOR
Page 16
Fig. 2C
$
Loading ...
Loading ...
Loading ...