Loading ...
Loading ...
Loading ...
14 15
Tapping Procedures
There are two keg sizes:
1) the quarter barrel containing 7-3/4 gallons or approximately 3-1/2 cases of 12 ounce bottles
2) the half barrel containing 15-1/2 gallons or approximately 7 cases
SANKEY TYPE KEG
COUPLER
(Taps all Coors™,
Miller™ and
Budweiser™ kegs)
APPROXIMATE MEASUREMENTS
REQUIRED TO TAP MOST KEGS
Quarter Barrel Half Barrel
Height
17 - 21 inches 25 - 29 inches
Diameter
16 - 20 inches 18 - 22 inches
Weight
80 - 85 pounds 160 - 180 pounds
1
2
3
Align lug locks on tavern head with lug
housing in top of key. Insert tavern
head.
Turn tavern head handle 1/4 turn
clockwise. The tavern head is now
secured to keg.
Rotate on/off valve handle 1/4 turn
clockwise to open beer and CO
2
ports
in keg. The keg is now tapped.
TWIN PROBE KEG TAPS
Insert probes Screw Tavern knob
hand tight
Turn on pressure
and draw beer
CO
2
Cylinders (It is recommended to have an extra cylinder on hand.)
Cylinder Diameter Height Empty Weight Full Weight
5 lbs. 5” 17-1/2” 12-1/2 lbs. 17-1/2 lbs.
Drain Hose & Container
Before using the beverage dispenser, make sure the drain hose and container are properly
installed.
1. Attach the hose to the drain.
2. Attach the container to the hose.
3. Empty the container when it becomes full.
4. Rinse both the hose and container before reattaching to the beverage dispenser.
Drain
Drain
Hose
Drain
Container
Loading ...
Loading ...
Loading ...