Loading ...
Loading ...
Loading ...
Beverage Dispenser Assembly
12
CO
2
Regulator
13
5
Regulator
Hose Barb
Snap Clamp
Red Air Line
Attach one end of the red air line to the hose
barb on the CO
2
regulator, using one of the two
snap clamps provided. (Use pliers to snap the
clamp tight to assure that there is no gas leak.)
Place the CO
2
cylinder and regulator in the right
corner of the refrigerator. NOTE: It is important
that the cylinder be kept in an upright position to
operate efficiently. Secure the cylinder using the
provided chain by looping the chain around the
cylinder valve and regulator.
6
CO
2
Cylinder
7
Snap
Clamp
Keg Coupler
Red Air Line
Fasten the other end of the red air line to the
keg coupler using the remaining snap clamp.
1
2
3
4
5
1. Low pressure gauge (reads the amount of
internal keg pressure)
2. Adjustment lock nut
3. Regulator adjustment screw
(after keg is tapped, screw clockwise until
low pressure gauge indicates between 12
and 14 lbs.)
4. Shut-off valve
5. CO
2
nut (use fiber CO
2
washer)
1. Close cylinder valve by turning clockwise “A”.
2. Unscrew adjustment screw (counter-clockwise) “B” as far as it will go.
3. Remove the regulator from empty cylinder “E”.
4. Remove dust cap from new cylinder “E”. Open and close valve “A” quickly to blow dust
from outlet.
5. With cylinder valve “A” in closed position, reattach regulator to cylinder at “E”. Be sure to
include the CO
2
washer.
6. Open valve “A” all the way. (This is important because this cylinder valve seals in two
places.)
7. Readjust regulator pressure “B” and open valve “C”.
A
E
B
C
D
How to Replace an Empty CO
2
Cylinder
Loading ...
Loading ...
Loading ...