Loading ...
Loading ...
GENERAL NOTES
3
NOTE: THESE INSTALLATION INSTRUCTIONS SHOULD BE LEFT WITH THE APPLIANCE
AND THE USER TO RETAIN FOR FUTURE REFERENCE.
Before installation of an AGA can be made, the site is inspected for suitability by an authorized
AGA distributor and corrected where necessary to conform with local or regional electrical codes.
DELIVERY REQUIREMENTS
The AGA TC3 arrives on 1 pallet.
The AGA TC5 (Hotcupboard Option) arrives on 2 pallets.
There must be access to the kitchen to manipulate a foot print of 39
9
/16” (1005mm) x 29
1
/8”
(740mm). A wooden template (skate with castor wheels) of dimensions 39
9
/16” (1005mm) x
29
1
/8” 740mm could be used to check if the AGA Total Control fully built appliance is able to fit
through the property grounds and doors into its installation position in the kitchen. It must also
be considered that the height of the appliance is 37
6
/8” (960mm) off pallet and 43
2
/8”
(1100mm) on the pallet, so high level obstacles/restrictions must not be overlooked.
If this skate/template can be manipulated through the property grounds and doors
into position, then the AGA Total Control can be installed as intended with no re-work.
GENERAL INSTALLATION REQUIREMENTS
The installation of the range must be in accordance with the relevant requirements of the local
Wiring and Building Regulations. It should be in accordance also with any relevant requirements
of the Local Authority.
In your own interest and that of safety to comply with the law, all appliances should be installed
by an authorized AGA distributor in accordance with the relevant regulations.
USA
Model Number AGA TC3
FCC ID: A2M-AGA-TC3
FCC ID: A2M-AGA-TC3CKR
This device complies with part 15 of the
FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.
CANADA
Model Number AGA TC3
IC: 10181A-AGATC3CKR
Model Number AE4M280526
IC: 10181A-AGATC3
Loading ...
Loading ...
Loading ...