Loading ...
Loading ...
Loading ...
Fig. 12 DESN 516552
6. Slide hotcupboard onto plinth until rear tongue bracket engages fully into rear of base slot,
(See Fig. 12). Ensure the appliance is aligned squarely with the plinth then proceed to
engage the front tongue bracket into the slot on the underside of the base plate. Once
satisfied that the front tongue bracket is engaged fully lock it into place by tightening the two
M6 screws fully.
7. The hotcupboard top plate is set
13
/64 (5mm) higher than the AGA Total Control top plate. This
is to prevent damage to the enamel during installation. Lower the top plate using the
adjusters (See Figs. 13 and 14).
Fig. 13 DESN 516591
15
Loading ...
Loading ...
Loading ...