Loading ...
Loading ...
Loading ...
INSTALLING THE DISHWASHER
Be sure that you or your installer follow these instructions closely so that the new dishwasher works
properly and that you're not at risk of injury when washing dishes.
Step 1 Check The Parts And Tools
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts Required
Provided with the dishwasher. Check when you unbox the dishwasher in Step 5.
For the hot water supply line ? We strongly recommend using copper tubing with a compression fitting or a flexible stainless
steel braided hot water supply line.
Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a leak inside the tube fitting.
ST3.5*9 X2
(For the installation
bracket)
Installation brackets
X2
ST3.9*13 X2
(for the kick plate)
ST4*14 X2
(For installation
Brackets)
Adjustment cap X2
Condensation strip
Cable Tie
(for the drain hose)
Kick plate
90° Elbow
Twist on wire
connector
Strain relief
Electrical tape &
Standard duct tape
Power cable
Hot water supply line
Tube fittings
Air gap
Rubber connector
Teflon tape or sealing
compound
Hose clamp
Loading ...
Loading ...
Loading ...