Loading ...
Loading ...
Loading ...
Step 6 Preparing The Dishwasher
1. Ensure that the circuit breaker and water supply valve are turned off before proceeding with the following steps.
Before you move or lay down the dishwasher for installation, make sure to adjust the height of the legs so the
legs are as short as possible. This prevents the legs from breaking. Level the dishwasher by adjusting the height
of the legs after you have the dishwasher in place.
2. Make sure there are no kinks and that the hose is not bent at any extreme angles that could constrict the flow of
water.
3. Remove the junction box cover located at the bottom front right of the dishwasher using a screwdriver, and then
Install the strain relief (Figure 4 - C). Make sure to keep the junction box cover you removed. It is used in Step 11,
Wiring Connections.
4. If the countertop is made of wood or a material that is not damaged by drilling, attach the two Installation
brackets that were supplied with the dishwasher using the supplied screws (Figure 4 - A). They will be used in
Step 9. Securing the Dishwasher.
Do not overtighten the 90° Elbow.
Doing so may damage the water inlet valve
and cause a water leak.
1
2
Loading ...
Loading ...
Loading ...