Loading ...
Loading ...
This appliance must be connected to grounded metal, a permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or
lead on the appliance.
The dishwasher is very heavy. Do not attempt to move or carry a dishwasher alone. Two or more people are
needed to move a dishwasher and avoid potential injuries.
If the power cable is damaged, it must be replaced by the manufacturer, a service agent or similarly qualified
person in order to avoid a hazard.
Do not touch the power cable with wet hands.
Do not connect another appliance to the same power outlet as the dishwasher.
Make sure to use a new water supply line. Old lines are susceptible to breakage because they become
hardened and may cause property damage due to a water leakage.
The dishwasher must be connected to a hot water supply with a temperature between 120 °F(49°C)and
149 °F(65°C). This temperature range provides the best washing result and shortest cycle time. Temperature
should not exceed 149 °F(65°C) to prevent damage to dishes.
Ensure that the water supplied to the dishwasher does not freeze. Frozen water can damage the hoses, valves,
pump, or other components.
For a full list of safety information, please refer to the User Manual.
GROUNDING INSTRUCTIONS
For a permanently connected appliance:
Before Installing The Dishwasher
Tip-Over Hazard
Do not use the dishwasher until it is correctly installed.
Do not push down on the door when it is open.
Do not place excessive weight on the open door.
Electric Shock Hazard
Failure to follow these instructions can result in death, fire, or electric shock:
Electrically ground the dishwasher
Connect the ground wire to the green ground connector in the junction box.
Do not use an extension cord.
To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that
dishwasher is completely enclosed at the time of installation.
Loading ...
Loading ...
Loading ...