Loading ...
Loading ...
Loading ...
Rinnai 14 DEPH_OIM
INSTALLATION
FREESTANDING INSTALLATION
1. Be sure heater is unplugged before attempting to install the castor components.
2. Assemble the 2 castors to the each castor foot by pushing the metal shaft fully home.
3. Place the heater in an ‘upside down’ position with the back of the heater facing you.
4. Remove the two of the pre-installed case screws from the base of the appliance .
5. With the front end of the castor assembly pointed towards the front of the heater, align the two holes in the
castor foot with the two holes in the base the appliance and fix in place with the screws removed in step 4.
6. Repeat steps 4 and 5 to install the second castor assembly.
8. The heater is now ready to be used as a free standing appliance. Refer to the operation section at the front of
this manual for full instructions on how to use the heater.
7. Rotate the heater back to the upright position and remove
the cable tie from the flexible cord, then insert the power
plug of the heater directly into a power socket outlet.
DO NOT bundle or coil the flexible cord
to reduce it’s length as overheating and
subsequent fire hazard could result.
A
B
Front of
castor
assembly
C
E
Back of
heater
A B
A B
D
A
B
C
D
E
D
C
IMPORTANT
Loading ...
Loading ...