Loading ...
Loading ...
Loading ...
18
CLEANING YOUR ICE MACHINE
Figure 25
Figure 24
Remove all of
the ice from
the ice bin
Figure 26
Remove the
black reservoir
drain plug from
the bottom of
the reservoir.
Figure 27
Turn the ice machine back on by pressing and
holding the "ON/OFF" icon for 3 seconds. The
display will indicate "ICE" mode. Press and hold
the "MENU" icon until a ashing "CLEAN"
is displayed. Press the "ON/OFF" icon until
"CLEAN" stops ashing. Your ice machine will
now enter the clean cycle.
The clean and rinse cycle will take about 49
minutes.
After the clean cycle is complete the ice machine
will return to the "OFF" position.
After the cleaning cycle is completed, verify that all build-up
has been removed. If not repeat the clean cycle procedure.
ICE
CLEAN
OFF
Refer to your cleaning solution instructions to determine
the proper amount of cleaning solution to add based on
2 quarts (1.9 liters) of water. Lift fascia door up to access
evaporator plate. (See Figure 27). Pour the cleaning
solution slowly on the evaporator plate so it lows down
into the fresh water reservoir. (See Figure 28).
Figure 26b
Splash shield
brackets
Replace the splash shield if removed.
Pour cleaning solution slowly
onto the front edge of evaporator
plate behind the grid cutter.
Figure 28
Evaporator
plate
Grid cutter
Splash shield
Lift fascia door up to
access evaporator plate
Loading ...
Loading ...
Loading ...