Loading ...
Loading ...
Loading ...
KNOWYOURSAW
READ THIS OPERATOR'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to famiIiarize yourself with the
location of the various controls and adjustments. Save this manual for future ref-
erence,
Bar Tool
(chain adjustment)
Muffler
Chain
CRAFTSMRN
Front Handle
J
Starter Rope
_j ON/STOP
witChpdmer
Bulb
Bar Oil FillCap Starter Fuel Mix Fill Cap
Housing
Throffle
Lockout
Rear
Handle
Cylinder Cover
Chain
Direction
of Travet
Throttle Choke Bar Clamp Chain Bar Clamp Nuts Guide Bar
Trigger Lever Catcher
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop
the engine,
THROTTLE TRIGGER
The THROTq-LETRIGGER controls en-
gine speed,
THROTTLE LOCKOUT
The THROTTLE LOCKOUT must be
pressed before you can squeeze the
throttle trigger, This feature prevents
you from accidentaIly squeezing the
trigger.
CHOKE/FAST IDLE LEVER
The choke and fast idte are set by pull-
ing the CHOKE/FAST IDLE LEVER out
fully for cotd or refueled starting, The
choke provides additional fuel to the
engine during cotd starting,
PRIMER BULB
The PRIMER BULB circulates fuel to the
carburetor to provide quicker starting.
CHAIN TENSION
tt is normal for a new chain to stretch
during first 30 minutes of operation.
You should check your chain tension
frequentIy. See CHAIN TENSION under
the SERVICE AND ADJUSTMENTS sec-
tion.
6
Loading ...
Loading ...
Loading ...