Craftsman 358350280 2.6 cu.in./42cc 2-Cycle Gasoline Chainsaw

Operator's Manual - Page 17

For 358350280. Also, The document are for others Craftsman models: 358.350280

PDF File Manual, 19 pages, Read Online | Download pdf file

358350280 photo
Loading ...
Loading ...
Loading ...
TROUBLE SHOOTING CHART
TROUBLE CAUSE REMEDY
Engine will not
start or will run
only a few
seconds after
starting.
Engine will not
idte property.
Engine will not
accelerate,
lacks power,
or dies under
a load.
Engine smokes
excessively.
Engine runs
hot.
Ignition switch off.
Engine flooded.
FueI tank empty.
Spark plug not firing.
FueI not reaching
carburetor.
Carburetor requires
adjustment.
None of the above.
Idle speed set too high
or too tow.
Low Speed Mixture
requires adjustment.
Crankshaft seals worn.
Compression tow.
None of the above.
Air filter dirty,
Spark plug fouled.
Carburetor requires
adjustment.
Exhaust ports or muff-
ter outlets plugged.
Compression low.
None of the above.
Choke partially on.
Fuet mixture incorrect.
Air filter dirty.
High Speed Mixture
requires adjustment.
Crankcase leak.
Fuet mixture incorrect.
Spark plug incorrect.
High Speed Mixture
set too lean.
Exhaust ports or muff-
ter outlets plugged.
Carbon build-up on
muffler outlet screen.
Fan housing/cylinder
fins dirty.
None of the above.
Move Ignition switch to ON.
See "Starting Instructions."
Fill tank with correct fuel mixture.
Install new spark plug.
Check for dirty fuet filter; replace.
Check for kinked or split fuel line;
repair or replace.
See "Carburetor Adjustments."
Contact Sears Service.
See "Carburetor Adjustments."
See "Carburetor Adjustments."
Contact Sears Service.
Contact Sears Service.
Contact Sears Service.
Clean or replace air filter.
Clean or replace plug
and regap.
See "Carburetor Adjustments."
Contact Sears Service.
Contact Sears Service.
Contact Sears Service.
Adjust choke.
Empty fuel tank and refill with
correct fuel mixture.
Clean or replace air filter.
See "Carburetor Adjustments."
Contact Sears Service.
See "Fueling Your Unit."
Replace with correct plug.
See "Carburetor Adjustments."
Contact Sears Service.
Clean spark arrestor screen,
Clean area.
Contact Sears Service.
Oit inadequate Oil tank empty, Fill oil tank.
for bar and Oil pump or oil filter Contact Sears Service.
chain clogged.
lubrication, Guide bar oil hole Remove bar and clean.
blocked,
17
Loading ...
Loading ...