Loading ...
Loading ...
Loading ...
9
TROUBLESHOOTING
1. Please note, if a power failure occurs due to disconnection of the power cord, or the
power button has been pushed off during an ice making cycle, small ice chips may
form and lodge in the automatic shovel causing it to jam. If this occurs, the ice
chips may be removed by disconnecting the power cord and gently pushing the
shovel to the rear of the cabinet and removing the ice chips, then restarting.
2. Please check if the water reservoir is flat when the ice shovel can not remove the
ice to ice basket. If not, please push the ice shovel gently by finger, then press
POWER button to restart.
PROBLEM
POSSIBLE CAUSE
SUGGESTED SOLUTIONS
The compressor
works abnormally with
a Buzzing
Noise
The voltage is lower
than
recommended
Stop the Ice maker and do not restart
until the voltage is normal.
Water shortage
indicator
light is on
1.There is no water
2.The pump is full of air
1.Add to some water until it reaches
MAX position
2.Press POWER button to restart
Indicator lights on
display are not on
Blown fuse/ No power
Replace fuse / Turn power on
The Ice made is too
large
and with pieces
sticking
together.
1.water temperature is
too low
2.Ice of previous cycles
left in the water tray
1.Select small size
2.Take out the ice under the standby
state
All indicators twinkle
simultaneously
Water tray is blocked by
ice cube
Unplug the power to take out the ice
which blocking the tray, then plug the
power and press the POWER button,
the machine will restart 3mins later.
Loading ...