Loading ...
Loading ...
Loading ...
Setting up the TV with your PC
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC.
The function also automatically fine-tunes the settings and adjusts the frequency values and positions.
How to Auto Adjust
1 Press the MENU button to display the menu.
Press the A or 'lr button to select Setup, then press the ENTER button.
Press the A or T button to select PC, then press the ENTER button.
Press the A or T button to select Auto Adjustment, then press the ENTER
button. The message Auto Adjustment in progress. Please wait. appears on
the screen and the picture adjustments are automatically activated.
Press the EXiT button to exit.
_-- This function does not work in DVI-Digital mode.
_-- You must be in PC mode.
Adustin the Screen Qualit
The purpose of the picture quality adjustment is to remove or reduce picture
noise, if the noise is not removed by fine tuning alone, then make the vertical
frequency adjustments and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned in the center of the screen.
_-- You mustbein PC mode.
1 Press the MENU button to display the menu.
Press the A or 'lr button to select Setup, then press the ENTER button.
Press the A or T button to select PC, then press the ENTER button.
2 Press the ENTER button to select image Lock.
Press the A or T button to select Coarse or Fine, then press the ENTER
button.
Press the 4 or _- button to adjust the screen quality, then press the ENTER
button.
Press the EXIT button to exit.
_,_ This feature may change the width of the image, if necessary, adjust the
position to center.
Continued...
Loading ...
Loading ...
Loading ...