Loading ...
Loading ...
Loading ...
9
ASSEMBLY INSTRUCTIONS
10. Remove protective cover from reflector panel (A)
and reflector plate (B).
Note: In order to achieve proper alignment of
reflector sections, it may be necessary to loosen the
preassembled bolts prior to assembly and retighten
once complete.
11. Attach reflector panels (A) together using
M6 x 10 mm screws (II) and Φ6 washers (HH).
Secure loosely with cap nuts (JJ).
Hardware Used
12. Attach reflector plate (B) to reflector panels (A)
using M6 x 10 mm screws (II) and Φ6 washers (HH).
Secure loosely with cap nuts (JJ). Once properly
aligned, tighten all screws and the preassembled bolts.
Hardware Used
Φ 6 Washer
M6 X 10 mm Screw
Cap nuts
Φ 6 Washer
M6 X 10 mm Screw
Cap nuts
Loading ...
Loading ...
Loading ...