Loading ...
Loading ...
Loading ...
14
As you are depressing the control knob, place long
stem lighter into the ignition hole on the emitter screen to light
the pilot.
Repeat step 7.
9. Push in and turn the control knob to the “LOW”, then
release control knob. If you want a higher temperature,
push in the control knob and turn counterclockwise to the
“HIGH”.
Note: If pilot fails to remain lit, all valves should be closed
and a waiting period of at least 5 minutes should pass before
attempting to light.
If you experience any ignition problem please consult
“Troubleshooting” on page 17.
Caution: Avoid inhaling fumes emitted from the heater’s first
use. Smoke and odor from the burning of oils used in
manufacturing will appear. Both smoke and odor will dissipate
after approximately 30 minutes. The heater should NOT
produce thick black smoke.
Note: The burner may be noisy when initially turned on.
To eliminate excessive noise from the burner,
turn the control knob to the PILOT position.
Then, turn the knob to the level of heat desired.
OPERATION INSTRUCTIONS
When heater is ON:
Emitter screen will become bright red due to intense
heat. The color is more visible at night. Burner will
display tongues of blue and yellow flame. These
flames should not be yellow or produce thick black smoke, indicating an obstruction of
airflow through the burners. The flame should be blue with straight yellow tops. If
excessive yellow flame is detected, turn off heater and consult “Troubleshooting” on
page 19.
Re-lighting:
Note: For your safety, control knob cannot be turned OFF without first depressing
control knob in PILOT position and then rotating it to OFF.
1. Turn control knob to OFF.
2. Wait at least 5 minutes, to let gas dissipate, before attempting to relight pilot.
3. Repeat the “Lighting” steps on prior page.
FOR YOUR SAFETY
Be careful when attempting to manually ignite this
heater. Holding in the control knob for more than 20
seconds before igniting the gas will cause a ball of
flame upon ignition.
WARNING
Loading ...
Loading ...
Loading ...