Loading ...
Loading ...
Loading ...
W415-2841 / E / 12.22.20
EN
32
troubleshooting
symptom problem solution
No difference from Hard wire connections are not See “hard-wiring installation” section.
Ember bed is
not glowing or
dimming.
Brightness not selected. See “operation” section.
Ember LED issue. Inspect the ember bed LEDs and replace, if necessary.
Main PCB board issue. Inspect the main PCB board and replace, if necessary.
LED flashing
“OH”.
Appliance has overheated
and safety thermal switch has
tripped.
Unplug power or turn off the circuit breaker. Allow appliance
to cool for 15 minutes, then plug in the appliance or turn the
breaker on. If problem persists, consults your dealer.
Loading ...
Loading ...
Loading ...