Loading ...
Loading ...
Loading ...
EN
W415-2841 / E / 12.22.20
27
entretien
This hand-held remote control must remain within 5 meters (17 feet) of the appliance to be effective. This
range may be reduced when battery power is depleted.
note:
1. To replace the existing battery, remove the battery
holder.
2. To remove the battery holder, turn the remote onto
the front side and press the left side lever towards
the center while pulling the battery holder out using
the slot provided (Fig. 7-1).
3. Replace existing battery (type CR 2025) with a new
battery and reinstall the battery holder onto the
remote by sliding it into position.
4. Battery cover will ‘click’ into remote control until
secure.
REMOTE
(REAR SIDE)
BATTERY
(CR 2025)
BATTERY
COVER
7.2 remote battery installation
• This remote control requires button batteries that are hazardous to young children.
• WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN
• Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical
burns and potential perforation of the oesophagus.
• If you suspect your child has swallowed or inserted a button battery, immediately seek
urgent medical assistance.
• Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other
mechanical fastener is tightened. Do not use if compartment is not secure.
• Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
• Tell others about the risk associated with button batteries and how to keep their children safe.
!
WARNING
OF REACH OF CHILDREN
A
ENFANTS
Fig. 7-1
Batteries must be disposed of according to the local laws and regulations. Some batteries may be
recycled, and may be accepted for disposal at your local recycling center. Check with your
municipality for recycling instructions.
Loading ...
Loading ...
Loading ...