Loading ...
Loading ...
Loading ...
Starting the Appliance
11
Starting the Appliance
As soon as the “steam ready” indicator light is on, the pressure is
reached in the steam generator and the iron is ready for use.The
heating time for the steam generator is about 10 minutes and can
be reduced by using lukewarm tap water.
No temperature regulation
The iron has been designed to offer you the peace of mind of steam
ironing any type of fabric. You no longer have to worry about adjusting
the temperature and/or the steam or arranging the garments according
to the fabric type. When ironing very delicate fabrics, it’s recommended
to perform an ironing test on a hidden point of the garment or to cover
the garment with a cloth. Alternatively, it is recommended to use the
teon insole (optional) to avoid any risk of damaging the garment.
STEAM IRONING
• To steam-iron push the “steam” button on the iron (10).
Warning! The steam emitted is very hot.
Danger of scalding!
Note! The appliance may give out some smoke when
using it for the rst time. It is a technical issue that will
cease after a short while.
During use and after a long pause, direct the rst steam jet toward
the air or into a piece of cloth, but not on the garment to be ironed,
so that any condensed water still in the iron may be expelled without
staining the garment.
After the rst steam jet the pressure slows down rapidly. It is not
a fault. This is due to the emission of the air that entered the boiler
during the lling.
Attention! To interrupt the emission of steam simply release the “steam”
button on the iron. When you are not ironing place the iron (soleplate down)
on the iron-rest mat.
After steam-ironing
- Turn off the appliance (on/off switch1).
- Pull the plug out of the mains socket (9).
- Let the appliance completely cool down.
- Remove the iron cord support.
Important! Store the appliance only when it has completely cooled
down.
STEAM EMISSION
Loading ...
Loading ...
Loading ...