Loading ...
Loading ...
Loading ...
Maintenance Fundamentals
Pre-ride Inspection
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Refer to the Competition Handbook for
procedures.
Check the following before each ride:
● Engine oil level
● Fuel line for condition
● Coolant for proper level
● Cooling system and hoses for condition
● Spark plug for proper heat range, carbon
fouling and spark plug wire terminal for
looseness
● Air cleaner for condition and contamination
● Clutch lever freeplay
● Breather drain for cleaning
● Steering head bearing and related parts for
condition
● Throttle operation
● Tires for damage or improper inflation
pressure
● Spokes for looseness
● Rim locks for looseness
● Front and rear suspension for proper
operation
● Front and rear brakes, check operation
● Drive chain for correct slack and adequate
lubrication
●
Drive chain sliders and drive chain rollers for
damage or wear
●
Exhaust pipe/Muffler for looseness
●
Every possible part for looseness (such as
cylinder head bolts, engine mounting bolts/
nuts, axle nuts, handlebar holder bolts, fork
bridge pinch bolts, drive chain adjuster, lock
nuts, drive chain roller bolt/nut, wire harness
connectors)
●
PGM-FI malfunction indicator lamp (MIL)
operation
Maintenance
48
Loading ...
Loading ...
Loading ...