Loading ...
Loading ...
Loading ...
)ut selection key
SETUP
keys
Changing the external device assigned to
the SCENE keys
If you want to control your playback device after selecting a scene,
follow the procedure below.
If you have not registered the remote control code
for the device yet, follow "Registering the remote
control codes for playback device" (p.3).
Hold down the corresponding SCENE key and input
selection key together for more than 3 seconds.
Once the setting is successfully completed, the TRANSMIT
indicator blinks twice.
If it blinks six times, the setting has failed. Repeat step 2.
Resetting remote control codes
You can reset a remote control code registered to each input
selection key.
2
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
The TRANSMIT indicator blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
Press the input selection key.
3 Use the numeric keys to enter "5098".
Once the remote control code is reset successfully, the TRANSMIT
indicator blinks twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
t'?s _÷s÷t the _emote co_'_t_"o_to factory d÷!:au_t s÷t_hgs
0.} Press CODE SET using a pointed object such as the tip of a ballpoint pen.
{_ Press SETUR
($} Use the numeric keys to enter "9981 ".
En 4
Loading ...
Loading ...
Loading ...