Loading ...
Loading ...
Loading ...
O
If any error message (such as E-l) or warning message (such
as W-2) appears, see "Error messages" or "Warning
messages" in "Owner's Manual".
, If the warning message "W-1 :Out of Phase" appears, see "If
"W-1 :Out of Phase" appears".
3 Use the cursor keys (<d/D) to select
"SAVE" (Save) and press ENTER.
Follow the procedure below to check the speaker
connections.
Warning
message
(_) Check for the blinking of the front display's indicatorto
identifythe problem speaker.
Problem speaker (blinks)
4' Disconnect the YPAO microphone from the
unit.
This completes optimization of the speaker settings.
The YPAO microphone is sensitive to heat, so should not be
placed anywhere where it could be exposed to direct sunlight or
high temperatures (such as on top of AV equipment),
(_) Check the cable connections (+/-) of the problem
speaker.
If the speaker is connected correctly:
Depending on the type of speakers or room
environment, this message may appear even if the
speakers are connected correctly.
Proceed to step 3.
If the speaker is connected incorrectly:
Turn off the unit, reconnect the speaker cable, and then
try YPAO measurement again.
En 7
Loading ...
Loading ...
Loading ...