Loading ...
Loading ...
Loading ...
FM/AM radio
FM radio reception is weak or noisy.
AM radio reception is weak or noisy.
Radio stations cannot be selected automatically.
There is muki-path interference.
Your area is too far from the FM station transmitter.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
Your area is too far from the FM station transmitter.
The AM radio signal is weak.
Auto Preset has been used.
AM radio stations cannot be registered as
presets.
Adjust the FM antenna height or orientation, or place it in a different location.
Press MODE to select monaural FM radio reception (p.40).
Use an outdoor FM antenna. We recommend using a sensitive muki-element
antenna.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.40).
Use an outdoor antenna. We recommend using a sensitive muki-element
antenna.
Adjust the AM antenna orientation.
Select the station manually (p.40).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.41).
USB
The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again.
The unit does not detect the USB device.
The file system of tile USB device is not FAT 16 or FAT 32. Use a USB device with FAT 16 or FAT 32 format, except USB HDDs.
Folders and files in the USB device cannot be The folder structure not supported by the unit is applied. The unit supports folder hierarchies of up to eight levels and up to 65,000 files per
viewed, level. If necessary, modify the folder structure on your USB device.
APPENDIX • Troubleshooting En 71
Loading ...
Loading ...
Loading ...