Loading ...
Loading ...
Loading ...
9
FILLING THE WATER TANK
If you want to use the evaporative cooling function, you need to
add water to the tank. Water can be filled from the top or the
bottom:
1. From the top: First open the top loading reservoir, and then
slowly pour water into the tank (Fig. 3 & 4). Once full, return
the cover to its original position. Make sure to check the
water level indicator in front of the unit so as to not fill water
beyond maximum level.
Open the top loading reservoir
(Fig. 3)
Fill water (Fig. 4)
3. Accessing the water tank (bottom): Before adding water to
the water tank, first slide the side lever to the top to raise the
water pump to the top of the tank:
• Undo the latches on both sides (Fig. 5)
• Lift the top half of the unit and slowly pour water into the
tank (Fig. 6).
After adding water:
• Place the top half of the unit back on top of the water
tank
• Fasten the side latches
• Slide the side lever down to move the tank to the
bottom.
Loading ...
Loading ...
Loading ...