Loading ...
Loading ...
Loading ...
14
AIR DRY FUNCTION
a) If you’re ready to store the unit and want to dry the cooling
pad and air filter after using the evaporative cooling function,
you can press and hold the “fan speed” button for 3 seconds
to start the air dry function.
b) When air dry function starts, the fan will run at high speed
for 20 minutes. The high-speed LED will continuously blink
every 0.5 seconds for 20 minutes until the unit turns off
automatically once the air dry function is finished.
c) When using the dry function, all other buttons stop working
except the “On/Off” button. If you turn off the unit before
the 20-minute drying cycle has completed, you’ll need to re-
run the air dry program again.
POWER FAILURE MEMORY FUNCTION
In the event of a power outage, the unit will beep 10 times when
turned on, and will pause for 30 seconds before resuming the
last mode it was in.
AUTOMATIC SHUT-OFF FUNCTION
For your safety, the unit will automatically turn off after 15 hours
of continuous operation when the timer function is not being
used.
Loading ...
Loading ...
Loading ...