Loading ...
Loading ...
Loading ...
35
Determing the Problem
Problem Possible cause(s) Solution(s)
Dryer does not start.
Start/Pause indicator
light does not flash.
Power cord end not inserted at all
or not inserted correctly.
Insert power cord end correctly.
A fuse is blown or breaker is
tripped.
Replace fuse or reset breaker.
For replacing the fuses in the supplied Power
Adapter.~ Replacing fuses in the Power Adapter -
step-by-step; Page 33
Door not closed properly. Check if laundry is caught in the door. Close the door
until a click is heard.
Program not selected. Rotate the program selector to desired program.
~ Program selection table; Page 28
The display panel and
indicator lights go out,
Start/Pause indicator
light flashes.
Energy-saving mode is activated. Touch any button to activate the display.
~ Environmentally friendly use of your dryer; Page 8
The display panel and
Start/Pause indicator
switch off.
Sleep mode after setting the Finish
in option is activated.
Touch any button to activate the display.
Dryer does not start.
Start/Pause indicator-
flashes.
Start/Pause button not pressed. Press the Start/Pause button to start the cycle.
é indicator light up.
Lint filter dirty. Clean lint filter.
~ Cleaning the lint filter; Page 30
Touch the Start/Pause button to reset the displayed
indication and then touch Start/Pause button again to
reset the appliance if necessary.
Condenser dirty. Clean Condenser.
~ Cleaning the Condenser; Page 32
Touch the Start/Pause button to reset the displayed
indication and then touch Start/Pause button again to
reset the appliance if necessary.
DR indicator light up.
Water has not drained
completely.
Drain hose is blocked. Check drain hose.
~ Maintenance of drain hose; Page 33
Check drain hose connection conditions.
Water is leaking out. Dryer is not leveled. Level the dryer.
~ Leveling the dryer; Page 18
The Condenser seal is dirty. Clean the Condenser seal.
~ Cleaning the Condenser; Page 32
Drain hose is leaking. Check entire length of drain hose for leaks; replace if
necessary.
Check that hose is clamped on hose barb at back of
the dryer securely.
Program terminates
shortly after starting.
Laundry is not loaded. Load the laundry.
~ Loading the laundry; Page 24
Load too small for selected pro-
gram.
Use time program.
~ Program selection; Page 23
~ Program selection table; Page 28
Loaded laundry is too dry. Check the loaded laundry. If it is dry, open the door,
remove laundry and turn program selector to Off.
The door opens by
itself.
The door not closed properly. Close the door until a click is heard.
Loading ...
Loading ...
Loading ...