Loading ...
Loading ...
Loading ...
14
Warning:
Before changing the direction in which the doors open, ensure that the appliance is not
connected to the power supply and that a second person is present and ready to help, as the
refrigerator is heavy and must be in a tilted position.
RISK OF INJURY!
• Remove the screws to take off the hinge
(Fig. 1, no. 1 and 2), remove the upper compartment
door and place it in a safe location.
• To remove the lower door, loosen the screws of the central
support hinge and take it off. (Fig. 1, no. 3 and 4)
• Lift the lower door from the hinge pin (Fig. 1, no. 5) and
place it in a safe location.
• Fit the lower stop pin, unscrewing it from the right side and
screwing it back on the left side.
• Place the refrigerator upright.
• Remove the left hinge covers from both doors (upper and
lower) and fit them on the opposite side of each respective
door.
• Place the refrigerator's door on the lower stop pin, turn
the central hinge by 180°, push it in the door's upper hole
and fasten the hinge.
• Fit the upper compartment door back on and fasten it to the
upper hinge support.
• Before tightening all screws, check that the doors have been
installed correctly.
Before reconnecting the refrigerator to the power supply, check
once more that all screws are tight, that the doors have been
installed correctly, and that the refrigerator is in an upright
position and placed steadily on the floor.
Fig. 1
Fig. 2
REVERSIBLE DOORS
Loading ...
Loading ...
Loading ...