Loading ...
Loading ...
Loading ...
HOW TO SET UP YOUR PRESSURE WASHER
(continued)
• Cut the tie wrapson the high pressurehose and
connect to spray gun. Tighten by hand.
g Place assembled spray gun on holder.
o Remove plastic cap and connect high pressure
hose to pump. Tighten by hand.
i
Hic
Hose here
Attach nozzle extension to spray gun.
"*-==_..,,=.
Attach adjustable nozzle to the nozzle extension.
, Place turbo nozzle in grommet hole in base.
PRE-OPERATIONAL CHECKUST
Before you operate your new high pressure washer
please review the following items:
, All assembly instructions have been completed.
, The high pressure hose connections to the spray
gun and to the pump are tight and secure.
, Engine oil is at proper level
Important: Any attempt to crank or start the engine
before it has been serviced with the recommended oil
may result in an engine failure. See page 8 for basic
instructions on adding oil and proper oil specifications
for your high pressure washer.
o Be sure gas tank is filled properly with clean, fresh,
unleaded gasoline.
, Become familiar with all controls - their location
and function. Operate those controls before
starting the engine.
Important: The water supply to your high pressure
washer must be connected and turned on prior to
starting your engine.
5
Loading ...
Loading ...
Loading ...