Loading ...
Loading ...
Loading ...
Caring for Your Dryer
Proper care of your dryer can extend its life. This section explains how to care for your dryer
properly and safely.
Cleaning the lint screen
Every load cleaning
The lintscreen is located under a lidon top
ofthe dryer. Clean it before each load. A
screen blocked by lintcan increase drying
time.
To clean:
1. Open the lidand pull the lint
screen straight out.
2. Roll lint off the screen with
your fingers. Do not rinse or
wash screen to remove lint.
Wet lintis hard to remove.
3. Push the lintscreen firmly back intoplace
and close the lid.
IMPORTANT:
• Do not run the dryer with the lint screen
loose, damaged, blocked or missing.
Doing so can cause overheating and
damage to both the dryer and fabrics.
• Some towels made of synthetic fibers and
natural fibers (polyester and cotton blends)
may shed more lintthan other towels,
causing your dryer's lintscreen to fill up
faster. Be sure to remove lintfrom the lint
screen before and after drying new towels.
As needed cleaning
Laundry detergents and fabric softeners can
cause a residue buildup on the lintscreen.
Clean the lint screen with a nylon brush
every six months or more frequently if it
becomes clogged due to a residue buildup.
Use the following method:
1. Wet both sides of lintscreen with hot
water.
2. Wet a nylon brush with hot I_ .F--"3
water and liquid detergent;
scrub lint screen with the
brush to remove residue
buildup.
3. Rinse screen with hot water.
4. Thoroughly dry lintscreen with a clean
towel; replace in dryer.
Lint signal
(on some models)
The lint signal (a whistle tone)
indicates excessive lint is
present on your lint screen. A
full lint screen restricts airflow
and reduces drying efficiency,
When you hear the signal, stop the dryer
and clean the lintscreen.
NOTE: Clean your lintscreen before each
load. Do not wait for the lintsignal.
13
Loading ...
Loading ...
Loading ...