Loading ...
Loading ...
Loading ...
EN - 25
accumulated residue.
To remove the detergent drawer:
• Pull the drawer forwards until it is fully
extended.
• Gently press down on the detergent
drawer (as shown above) and pull the
drawer from its housing.
• Clean the drawer with water and a soft
brush.
• If there is any residue in the drawer
housing, remove with a soft brush.
Take care to prevent any residue from
dropping into the machine.
• Dry the drawer thoroughly and slide it
back into the housing.
Do not wash your detergent drawer
in dishwasher.
Fluid detergent level plate (*)
Remove the fluid detergent level plate for
cleaning and maintenance purposes, as
shown and wash off any detergent residue.
Slide the fluid detergent level plate back
into the guides. Make sure that there is no
remaining detergent residue.
(*) Specifications may vary depending on
the product purchased.
9.4. Pump Filter
1
3
5
2
4
6
The pump filter system in your Washer
Machine prolongs the life of the pump by
preventing lint from entering your machine.
We recommend that you clean the pump
filter every 2 months.
The pump filter is located behind the cover
on the front-lower right corner.
To clean the pump filter:
1. You may use the washing powder spade
(*) supplied with your machine or liquid
detergent level plate to open the pump
cover.
2. Lodge the end of the powder spade
or liquid detergent level plate in the
opening of the cover and gently press
backwards. The cover will open.
• Before opening the filter cover, place a
container under the filter cover to collect
any water left in the machine.
• Loosen the filter by turning anticlockwise
and remove by pulling. Wait for the
water to drain.
NOTE:Depending on the amount of
water inside the machine, you may have to
empty the water collection container a few
times.
3. Remove any foreign materials from the
filter with a soft brush.
4. After cleaning, re-fit the filter by inserting
it and turning clockwise.
5. When closing the pump cover, ensure
that the mountings inside the cover
meet the holes on the front panel side.
6. Close the filter cover.
WARNING: The water in the pump
may be hot, wait until it has cooled down
carrying out any cleaning or maintenance.
(*) Specifications may vary depending on
the machine purchased.
Loading ...
Loading ...
Loading ...