Loading ...
Loading ...
Loading ...
Using a screwdriver, tighten the screw,
DONOToverlighten.Overtlghteningcould stripthe
screwholes.
DONOToperate the cleaner withoutthe screwin
place. -..
CORD ASSEMBLY
Make sure the quick release upper cord hook is in
the upright position,
Remove the
wire fie from
the power
cord, Wrap
the power.
cord arour_d
the upper
and lower
cord hooks,
TTACHMENT
ASSEMBLY
TOASSEMBLE
ATTACHMENTS
After the handle has been assembled to
th$ body and the power cord has been
wrapped around the cord hooks, the
attachments can be assembled,
. The wand can be affached to the
hose by inserting the small end of the
wand into the open end of the hose,
Be sure to align the tabs on the wand with
the "J" slots in the hose, Once the wand is
inserted into the hose it should be twisted to
the right to lock the tabs into the "J" slots,
2. The wand and hose can then be routed in front
of the handle and over the hose support.
3. The wand can then be placed over the end of
the short hose, twisting as you push down,
4. The dusting brush can be placed in the holder in
front of the wand with the brush portion up,
5. The crevicetoolcan be slippeddown intothe holder
besidethe wand.
Brush
Tool
5
Loading ...
Loading ...
Loading ...