Loading ...
Loading ...
Loading ...
Grasp the clips at the back and pull forward and up
to remove the lower plate.
Clips
Personal Injury Hazard
Always unplug the vacuum cleaner before cleaning
the brush area as brush may suddenly restart. Failure
to do so can result in personal injury.
TO CLEANBRUSH:
Shaft
Agitator
Assembly
Carefully lift the right end of the agitator assembly
and then lift the left end. Remove the brush
assembly,
Remove the worn or broken belt from the motor
drive shaft.
PersonalInjuryHazard
Becareful when removingbrushassembly,the belt
tensionishigh.Failuretodo so could resultinper-
sonal injuryfrombrushassemblyreleasingquickly
and snappingaway.
Remove any dirt or debris in the belt path area or in
the brush roller area.
Ro//er
Area
Carefully remove the brush end caps and washers to
check for string and hair build-up.
f
Brush
End Cap
?
CAUTION:
When you remove
the end caps, a
small washer on
each end may
come off. Do not
Iose,.these two
washers.
Remove any string or debris.
Replace the
washers and
end caps. See
exploded view
for correct
assembly,
Exploded View - BrushAssembly
End
Cap
12
Loading ...
Loading ...
Loading ...