Loading ...
Loading ...
Loading ...
IGHTBULBCHANGING
NOTON ALLMODELS
ElectricalShockOrPersonalInjuryHazard
Disconnectelectrical supplybeforeservicingor
cleaning theunit.Failuretodo socould resultin
electrical shockorpersonalinjuryfromcleaner
suddenlystarling.
Disconnect electrical supply.
The handle must be pulled down and the cleaner
turned over.
Release the lower plate by pushing the tabs in
toward the center.
Grasp the clips at the back and pull forward and up
to remove the lower plate.
With the lower plate off the bulb housing can be
pulled off the flange it ismounted to by wiggling the
socket back and forth,
Bulb Housing
With the bulb housing loose the bulb can be
removed by pushing in and twisting it counterclock-
wise. The new bulb can be placed in the socket, J_ine
up the post on the bulb with the slots in the socket
and while pushing the bulb ir_to the socket, twist the
bulb clockwise.
(NOTE:See page 3 for Bulb #,)
Replace the lightbulb withthe same or smaller
wattage sizeto preventdamage tosurrounding
parts.
Reinsert the bulb housing onto the flange by pushing.
down.
Reinstall the lower plate by placing the front tabs on
the plate into the slots on the nozzle housing and
pushing the plate to the rear until the back clips snap
into place, Push the tabs to the outside.
14
Loading ...
Loading ...
Loading ...