Loading ...
Loading ...
Loading ...
Installation
37
EN
Flush mounting dimensions (mm)
For this type of mounting, you have to make
an additional cut at the edges of the recess
if you wish to install the hob flush with the
countertop.
1 = Electrical connection
After laying the adhesive seal (A) on the
glass surface and after positioning and
securing the hob, fill the edges with
insulating silicone (B) and wipe away any
excess. In the event the hob needs to be
removed, cut the silicone using a cutter
before attempting to remove it (C).
5.6 Mounting
Over built-in oven unit
The clearance between the hob and the
kitchen units or other built-in appliances
must be enough to ensure sufficient
ventilation and air discharge. If installed
above an oven, a space must be left
between the bottom of the hob and the top
of the appliance installed below.
opens on bottom
A B C D E
min.
50
min.
460
min.
750
20รท60
min.
50
L P Q F G
600 603 513 147 145
700 753 513 147 220
900 903 513 144 181
If installed on top of an oven, the
latter must be equipped with a
cooling fan.
Loading ...
Loading ...
Loading ...