Loading ...
Loading ...
Loading ...
23
Troubleshooting (continued)
Problem
Burner(s) will not light
using ignitor.
(See” Electronic Ignition
Troubleshooting” also)
Burner(s) will not
match light.
Sudden drop in gas
flow or low flame.
Flames blow out.
Flare-up.
Persistent grease fire.
Flashback
[fire in burner tube(s)].
Possible Cause
ELECTRONIC IGNITION:
• No spark, no ignition noise.
• No spark, some ignition noise.
• Sparks, but not at electrode or at full
strength.
• See “GAS ISSUES” on previous page.
• Match will not reach.
• Improper method of match-lighting.
• Out of gas.
• High or gusting winds.
• Low on gas.
• Grease buildup.
• Excessive fat in meat.
• Excessive cooking temperature.
• Grease trapped by food buildup around
burner system.
• Burner and/or burner tubes are blocked.
Prevention/Solution
• See Section I of “Electronic Ignition System.”
• See Section II of “Electronic Ignition System.”
• See Section III of “Electronic Ignition System.”
• Use long-stem match (fireplace match).
• See “Match-Lighting” section of” Use and Care.”
• Check for gas in gas cylinder.
• Turn front of barbecue to face wind or increase flame height.
• Refill gas cylinder.
• Clean burners and inside of barbecue/firebox.
• Trim fat from meat before barbecueing.
• Adjust (lower) temperature accordingly.
• Turn knobs to OFF. Turn gas off at gas cylinder. Leave lid in position
and let fire burn out. After barbecue cools, remove and clean all parts.
• Turn knobs to OFF. Clean burner and/or burner tubes. See burner
cleaning section of Use and Care.
Loading ...