Loading ...
Loading ...
Loading ...
1110
of your Vacuum Sealer
To Store Appliance:
Clean unit thoroughly as detailed in
“Care & Cleaning” section.
After unit has been cleaned and allowed to fully
dry, close lid and push Latch into Store (middle)
position
A
. This setting will keep lid closed
but prevents any undue pressure from being
applied to internal sealing Gaskets of unit.
Always leave Latch in Store position when not
in use. Never store Lid in Operate position as
Gaskets may become compressed and unit will
not vacuum bag.
To Clean Appliance:
CAUTION: Remove Power Cord from electrical
outlet. Do not immerse in liquid.
Check Gaskets and around Drip Tray to make sure
they are free from food materials. Wipe off Gasket
with warm soapy cloth if needed
A
. Upper and
Lower Gaskets may be removed for cleaning.
Clean with warm, soapy water and allow gaskets
to dry before reinserting in machine.
The Removable Drip Tray makes cleanup easy
when small amounts of liquids are pulled into
Vacuum Channel during vacuum process.
Empty Drip Tray after each use. Wash in warm
soapy water or place in top rack of dishwasher.
Check for food residues in Drip Tray Slot. Clean
if needed. Dry thoroughly before reinserting into
appliance.
To Clean Built-in Handheld Sealer Reservoir:
Empty Reservoir after each use. To remove
Reservoir from Handheld Sealer, holding top
portion firmly (black upper piece), pull Lower
Reservoir down and off
B
. Wash in warm soapy
water. Air dry before replacing.
NOTE: Always clean after each use when fluid is visible.
A
Push Latch into Store
position to store.
Lift Drip Tray out
Pull Reservoir off
A
B
of your Vacuum Sealer
Care & Cleaning Storage Guide
Loading ...
Loading ...
Loading ...