Loading ...
Loading ...
Loading ...
FREEWARNINGLABELREPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-4-DEWALT
(1-800-433-9258) for a free replacement.
f
DW734,2,,2,,T.,c..E.sP .E.
SER.
®
L_ AVERTiSSEiViENT
FORYOUROWN SAFETY, READ iNSTRUCTiON MANUAL
BEFOREOPERATING PLANER.ALWAYS USE PROPEREYE
AND RESPIRATORYPROTECTION.WHEN SERViCiNG, USE
ONLY iDENTiCAL REPLACEMENTPARTS. O0 NOT EXPOSE
TO RAIN ORUSE IN DAMP LOCATIONS.A TITRE PREVENTIF,
LIRE LE GUIDE D' UTiLiSATi0N. NE PAS EXPOSER,_ LA
PLUiEET NE PAS UTiLJSERDANS LESEMPLACEMENTS
BUMiDES.
DEWALT iNDUSTRiAL TOOL CO. BALTIMORE, MD 21286 USA
FOR SERVICE iNFORMATiON, CALL 1-800-4-DEWALT www.B_WALT.com
_ TOREDUCETHERISKOFINJUffY,OSERMUSTR_AoANDUNDERSTANDINSTRU_TION]
MANUA_BE_O_EOpERA_NGpLA_E_.ALWAY_W_ _E pROT_CllO_IA_I_._ST MAS_IFN_CESSA_V._Er l
.AN0S_°AWAYFH0_M0T011CAnRIAGEW_ENFEE01NGWORKpI_CE.N_ M_E currE_81A_EREPlaCEMENT
0RA_I_'0n_ff _p_IRS/AOJUSTM_NTSWITI_UNI_P_U_EDIN.M_ CER_I_IT.ATnf_ swrrcHIsI_ _.E 0FF
P0_nl0_ __F0R_Ce_I_EC_I_PL__ TOAPOWERS0U_CE._ ES_ T_ATT_ ct_rr_ _LA_S A_ Me_N_ AS
DESCribEDiNT.EI_STRUCOON_NOA_ _NOC_C_T_AT_LLt_0LTS_REFIRMLYTI_T_NEOB_F0_
H_DS. _r _UA_I_SiNpt_c_ _N_ING_O0WOR_N_0_. m'_y ALE_T- NEW_OPERATETHEUNnWHeN
TIREO0__N_ T_IEI_I_LUENC_O_D_U_S.AL_O_O_O_M_IC_OON.O0NOTUS_IN OA_ROOS
N_W_pt_E MAlariaLWHIC_IS SH0_T_T_ANlZI_C_S. _0 _0TWEA__OVES,_EClnlES.JEWELRY.0R
LOOS_C_OTHI_IG.SOMEWOO0COm_NSreESERVATIVESSUCHASCOPP__H_OMIOMA_S_N_I_{CCA_WHIC.
MINIMIZ_SKINC0_ACT._XHAUSTCHUTe;REM0WSI_A_NGSWIT._RUS.ORWCUU__Fr_ P0W_R_AS
BEENSHU_O_FA_IDCUttERH_ADHASSToppEDROTATINg.
KEEPHANDS
AWAY FROM
CUTTERHEAD.
KEEP HANDS AWAY FROM CUTTER HEAD.
REMOVAL OF THE TRAY/GUARD
WiLL ALLOWENGAGEMENTOF _|R|_
THE CUTTER HEAD LOCK, THE
CUTTER HEAD WiLL NOT
ROTATE, DAMAGE MAY RESULT
iF UNDER POWER.
Troubleshooting Guide
IF THE MATERIAL DOES NOT FEED PROPERLY, CHECK FOR:
• dull knives, rotate or replace as necessary. Refer to Changing the Planer Knives section.
• excess clogging in the dust hood. Refer Dust Hood Installation paragraph in the Assembly section.
• excess oil/debris/pitch on feed rollers. Refer to Periodic Maintenance and Cleaning and Lubrication paragraphs
under the Maintenance section.
• excessively twisted, cupped or bowed material. Refer to Twisted, Cupped and Bowed Wood paragraph in the Basic
Planing section.
• a broken drive belt. Refer to Installing a New Belt paragraph in the Maintenance section.
• dull knives. Refer to Changing the Planer Knives section.
IF THE CIRCUIT BREAKER TRIPS REPEATEDLY:
• dull knives, dull knives can cause motor overloading, rotate or replace as necessary. Refer to Changing the Planer
Knives section.
NOTE: Circuit breaker overload is often the result of dull knives. If the circuit breaker on your planer trips, check the
sharpness of your knives before attempting to reset the breaker in order to continue planing.
• reduce the depth of cut, an overly aggressive cut could cause motor overloading. Refer to Depth Adjustment
paragraph in the Operation section.
IF THE UNIT DOES NOT RUN, CHECK TO SEE:
• if the unit is plugged in. Ensure unit is plugged into the appropriate outlet, refer to the Important Safety Instructions
for AII Tools section.
• if the tool tray is properly in place. Refer to Figure 1 for proper location.
• if the circuit breaker needs to be reset. Refer to Circuit Breaker Reset Button paragraph under the Maintenance
section.
• if the motor brushes are depleted, replace as necessary. Refer to Brushes paragraph under the Maintenance section.
Loading ...
Loading ...
Loading ...