Loading ...
Loading ...
Loading ...
17
Installation Instructions
INSTALATION INSTRUCTIONS
MAKE TUBING CONNECTIONS (Cont.)
RO Product
Water Faucet
Drain
Adapter
Sink
P–Trap
HOT COLD
Water Supply
Fitting
3/8” Black
Tube
1/4” Red
Tube
3/8” Blue
Tube
3/8” Yellow
Tube
1/4” Green
Tube
Tank
Connector
Storage Tank Reverse Osmosis Assembly
Green Collet
Blue Collet
Yellow Collet
Red Collet
BLUE TUBE
from Reverse Osmosis faucet to
Reverse Osmosis assembly
1. Locate the 3/8” blue tube attached to the faucet.
2. Route the loose end of this tube to the blue
collet fitting on the Reverse Osmosis assembly.
3. Cut tube square and to length.
4. Insert all the way into the fitting.
5. Pull on the tube to be sure it is held firmly in the
fitting.
BLACK TUBE
from Reverse Osmosis faucet to
drain adapter
1. Locate the 3/8" black tube attached to the
faucet.
2. The loose end needs to be attached to the quick
connect fitting on the sink drain adapter.
3. Cut this tube as needed to route it as straight as
possible, without loops, dips, or kinks.
4. Cut the end of the tube square.
5. Insert all the way into the fitting.
6. Pull on the tube to be sure it is held firmly in the
fitting.
RED TUBE
f
rom Reverse Osmosis faucet to
Reverse Osmosis assembly
1. Locate the 1/4” red tube attached to the faucet.
2. Route the loose end of this tube to the red collet
fitting on the Reverse Osmosis assembly.
3. Cut tube square and to length.
4. Insert all the way into the fitting.
5. Pull on the tube to be sure it is held firmly in the
fitting.
Loading ...
Loading ...
Loading ...